| |
This sounds like
something that would be relatively easy to do,
however, I have been collecting these bloody tools
piece by piece, and I wish someone would have told
me what I would need so I wouldn’t have to make
mid-repair trips to Wal-Mart or Home Depot.
Overall, my whole toolbox ran me about 35-40
dollars, not including the Dremel Tool. Below, in
Bold, is an item you MUST have to do some of the
repairs shown in the Tech section of the Armory.)
Any tools not shown here that you may need for a
project will be listed at the top of the repair
article.Lets start with the
Easy stuff.
1. A Magnetic Large
Phillips Head Screwdriver
2. A Magnetic Small Phillips Head Screwdriver
3. Assortment of Small Phillips and Flathead
Screwdrivers
4. TORX TX-6 Hex Driver (Used On M4 and some
others, can be optional)
5. TORX TX-10 Hex Driver (Must have for Mechbox Disassembly)
6. Large Assortment of Allen Keys (Can be bought
cheap at the stores listed above)
7. Wire strippers
8. Electrical Tape
9. Silicon Oil Spray
10. Blue Loctite
Optional Normal Tools
1. Plastic Hammer
2. Soldering Iron (And Solder, obviously) – Highly
Recommended*
3. Dremel Tool (The more attachments the better!)
– Highly Recommended*
4. Side cutters
5. Pliers
Note – Magnetic Screwdrivers make Airsoft repairs
10 times easier.
Specific Airsoft Tools\Accessories
1. Gear Grease
2. Cylinder Grease
3. Battery Discharger
4. Battery Connectors
5. Loading Rod(s)
6. Cleaning Rod(s)
7. Gun Barrel Cleaning Patches
8. Also, over time I have collected a plethora of
small screws, you never know when a small screw
will come in handy, so keep them in your box.
|
Player Profiles
