|
First off, Team Airsoft or any of its agents to not accept responsibility for any actions taken as a result of your reading these guides. Use them at your own risk. These Guides are here as a source of information. |
|
NICAD battery charging/discharging instructions <click here> |
NIMH battery charging/discharging instructions <click here> |
| Part 1 - Assembling an Airsoft Toolbox |
|
This sounds like something that would be relatively easy to do,
however, I have been collecting these bloody tools piece by piece, and I wish someone would have told
me what I would need so I wouldn't have to make mid-repair trips to Wal-Mart or Home Depot.
Overall, my whole toolbox ran me about 35-40 dollars, not including the Dremel Tool. Below, in
Bold, is an item you MUST have to do some of the repairs shown in the Tech section of the Armory.)
Any tools not shown here that you may need for a project will be listed at the top of the repair
article.
Lets start with the Easy stuff.
1. A Magnetic Large Phillips Head Screwdriver Optional Normal Tools
1. Plastic Hammer Specific Airsoft Tools\Accessories
1. Gear Grease |
|
| Disclaimer
|
|
||||
|
Copyright © Team
Airsoft |
||||